Happymodel Mobula6 frsky edition 1s brushless whoop Manua Happymodel Mobula6 flysky edition 1s brushless whoop Manual Happymodel Mobula6 external DSM2 DSMX receiver edition 1s brushless whoop Manual Happymodel Mobula6 onboard SPI DSM2 DSMX receiver edition 1s brushless whoop Manual
VTX_TABLE Setting file for Betaflight 4.1 compatible with Mobula6/Mobula7/Mobula7 HD/Sailfly X/Larva X
BTFL_vtxtable_20191028_104831 Compatible with Mobula6/Mobula7/Mobula7 HD/Sailfly X/Larva X Happymodel HCF7/HCF7P AIO vtx&cam compatible Happymodel Whoop VTX and Diamond vtx compatible Happymodel Crazybee F4 Lite flight controller compatible The SPI bind code is changed to “bind_rx” since Betaflight 4.1
First please make sure your RXSR receiver has flashed the correct F.Port PROTOCOL FIRMWARE , download from https://www.frsky-rc.com/r-xsr/ Connection diagram(Please careful weld since the tiny soldering pin) Betaflight setup: Enable Serial RX for UART2 and select Serial-based receiver for the Receiver Mode, then choose Frsky FPort in the tab list from Serial Receiver provider. Don’t…
How to add flysky ibus receiver or Specturm dsm2/dsmx receiver for the Crazybee F4 PRO V3.0 flight controller (Both version compatible)
Weld the signal pin of the ibus or dsm2/dsmx receiver to RX1 pad of the flight controller. Enable Serial_RX for UART1 and VTX(TBS_Smartaudio for UART2) ,then choose the serial-based receiver for receiver mode in the configuration of Betaflight, and then choose the correct receiver provider based on your receiver brand .