New version Mobula7 HD frsky D8 for Betaflight 4.0.x New version Mobula7 HD flysky for Betaflight 4.0.x New version Mobula7 HD frsky DSMX for Betaflight 4.0.x New version Mobula7 HD PNP for Betaflight 4.0.x These diff is the stock settings for the Mobula7 HD which comes out with the CrazybeeF4 PRO V3.0 flight controller .
First please make sure your RXSR receiver has flashed the correct F.Port PROTOCOL FIRMWARE , download from https://www.frsky-rc.com/r-xsr/ Connection diagram(Please careful weld since the tiny soldering pin) Betaflight setup: Enable Serial RX for UART2 and select Serial-based receiver for the Receiver Mode, then choose Frsky FPort in the tab list from Serial Receiver provider. Don’t…
How to add flysky ibus receiver or Specturm dsm2/dsmx receiver for the Crazybee F4 PRO V3.0 flight controller (Both version compatible)
Weld the signal pin of the ibus or dsm2/dsmx receiver to RX1 pad of the flight controller. Enable Serial_RX for UART1 and VTX(TBS_Smartaudio for UART2) ,then choose the serial-based receiver for receiver mode in the configuration of Betaflight, and then choose the correct receiver provider based on your receiver brand .
New Crazybee F4 V3.0 Frsky New Crazybee F4 V3.0 Flysky