Introducing Mobula6 HDZero, the very first 65mm HD brushless whoop in the World, weights less than 23.5 grams only! We have been working on innovations of Brushless Whoop for a few years. Just like many of you, we are particularly eager to have a 65mm FPV whoop carrying HD VTX. Teaming with HDZero, Runcam, Nick…
The flight controller for Mobula6 and Mobula6 HD Frsky version and Flysky version would upgrade to V4.2 version since 15th .Jun 2022 The flight controller for Mobula6 and Mobula6 HD Frsky version and Flysky version would upgrade to V3.1 version since 14th .Feb 2022 Update log: Version V4.2 Come with BMI270 Gyro sensor Version V3.1…
Notes: Mobula6 and Mobula6 HD are the same firmware and settings , the difference is only Frsky or Flysky , pay attention to this. V4.2 version Flight controller Firmware download: betaflight_4.3.0_STM32F411 RC3 For both Frsky version and Flysky version V4.2 version flight controller Diff document download: Mobula6 Frsky with V4.2 flight controller version betaflight_4.3.0_STM32F411 RC3…
If your Mobula6 HD comes with CrazybeeF4FR lite V3.1 or CrazybeeF4FS lite V3.1 flight controller , please visit this link to download new firmware and diff settings Default Factory Firmware and Diff settings for Mobula6 HD V2.0 which comes with new CrazybeeF4FR Lite v3.1 and CrazybeeF4FS Lite V3.1 flight controller Mobula6 stock factory diff settings…
Some flight controller like CrazybeeF4FR Lite, CrazybeeF4FS Lite, X12 ELRS V2.1, X12 FRSKY V2.1 would upgrade the Gyro/acelerometer to be ICM42688P recently. ICM42688P GYRO aligment: Betaflight official 4.3.1 already support ICM42688P, but CRAZYBEEF4FR 4.3.1 target has RX not stable problem during our test . If your flight controller package or BNF drone package received with “ICM42688P…
Notes: Due to this flight controller is spare part for Mobula6 HDZERO, the original default device for OSD is “MSP” If you bought this flight controller and used for analog camera, you may need some settings : First connect to betaflight configurator , then move to CLI command, and enter “set osd_displayport_device = MAX7456”, then…