Notes:
The New Snapper7 comes with SE0802 KV19000 motor , lighter and higher efficiency than 0703 motor since Sep.15th 2018
Specifications:
Brand Name: Happymodel
Mode Name: Snapper7
Item Name: 1S Brushless Whoop racer drone BNF
Wheelbase: 75mm
Size: 98.5mm*98.5mm*36mm
Weight: 27g(without battery)
Take off weight: 41g(with 450mah battery)
Receiver Option: Frsky / Flysky / DSMX
Features:
Betaflight support , multi flight mode: ACRO/AIR/ANGLE
Powerful Brushless motor and Smooth ESC
CNC aluminum alloy propeller guard
Betaflight OSD support ,easy to get RSSI , Voltage and other info from your goggles(DSMX version has no RSSI)
Adjust the settings and the PID of the flight controller via OSD
Frsky version support D8/D16 mode (Non-eu firmware)
Flysky version support AFHDS and AFHDS-2A protocol transmitter
DSMX version support DSM2/DSMX Protocol transmitter
Full telemetry function ready
Head lights ready
Camera angle adjustable
Real Bind and Fly version
Package includes:
Item Name | Basic version | Standard version |
Snapper 7 Frame |
1 |
1 |
Crazybee F3 FC (Frsky and Flysky option) |
1 |
1 |
SE0802 KV19000 Motor |
4 |
4 |
40mm 3-blades propeller(4cw+4ccw) |
1 |
1 |
AIO Camera & VTX |
1 |
1 |
3.8v 450mah 30C/60C battery |
1 |
3 |
USB Lipo/LIHV Charger |
1 |
0 |
1S06 6 way Lipo/LIHV charger |
0 |
1 |
Propeller disassemble tool |
1 |
1 |
Screwdriver |
1 |
1 |
Spare parts specifications:
Motor | Mode: SE0802 KV19000 Configu-ration:9N12P Stator Diamter:8mm Stator Length: 2mm Shaft Diameter:Φ1.0 Motor Dimension(Dia.*Len):Φ10.5*14.9 Weight(g):2.0 No.of Cells(Lipo):1S |
Flight controller | Firmware: Betaflight_3.3.0_Crazybee MCU: STM32F303CCT6 (72MHZ, 256K FLASH) Sensor: MPU-6000(SPI connection)Board size: 28.5 * 28.5MM Board weight: 3.5 g Power supply: 1S battery input (DC 3.5-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Frsky receiver with telemetry(D8/D16 switchable) Built-in Betaflight OSD(SPI Control) Built-in Current meter (Max 14A,could be modified to 28A by replace resistor) Built-in 5V 0.8A BEC with LC filter Built-in voltage detection BLHELI_S pass-through ReadyHeading LED Ready |
Onboard 4in1 ESC | Power supply: 1S LiPo/LiPo HV (4.2v/4.35v) Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_L_5_REV16_6.HEX Default protocol: DSHOT600 |
Frsky receiver Version | SPI BUS receiver Frsky D8/D16 switchable Compatible Non-EU Firmware transmitter Channels: 8ch or 16ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
Flysky receiver Version | SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 300m Failsafe support |
DSM2/DSMX receiver Version | Serial-based Spektrum compatible satellite receiver Protocol: DSM2/DSMX Channels: Max 12ch(Based on your transmitter) No ground interference ( Transmitter and receiver 1 m from the ground): 300m Failsafe support |
AIO Camera&VTX | Output power: 25mw Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Camera resolution: 700TVL Field of view: 120° Video Format: NTSC Antenna: RG178 antenna Frequency: 5.8GHz 5 bands 40 channels With Raceband Size: 13.9″12.0mm ( L*W ) Weight: 3g |
Lipo Battery | Capacity:450mAh Voltage:3.8v Continuous Discharge Rate: 30C Instantaneous discharge rate: 60C Size: 60mmx18mmx7mm Weight: 13.6gConnector: PH2.0 |
Hello
Dose the Happymodel Snapper7 binned with Frky X9D Plus ?
Thank you