Specifications:
Brand: Happymodel
Weight: 41g
Dimensions: 82x51x22mm
Input: DC 7V-22V
Output switchable: Fixed at 200~600 milliamps
Cutoff voltage switchable:
4.20v cell charging cutoff (+- 0.5% margin of error) for 1S Lipo Battery
4.35v cell charging cutoff (+- 0.5% margin of error) for 1S 3.8V LIHV Battery
Features:
– Supports Picoblade 1.25, PH 2.0mm battery
– Supports LiHV 4.35v battery
– Supports 6 Batteries charged at the same time
– The display shows the each channel input and output voltage in order.
– Charge at either 200mA or 600mA according to the setting of a switch that can be set independently for each port.
– 2-5S (7.4V-22V)as power supply or use adapters with at least 2A battery output.
NOTES:
Ports are numbered 1-6 Do not put more than one battery on a single port. For example: do not insert one battery on the Picoblade 1.25 plug and another on the same port with the PH 2.0 plug.
4 Comments
Leave a Reply
You must be logged in to post a comment.
What size barrel plug is needed for the Happymodel UR65 FPV Racing Drone Spare Part 1S06 6 Way Lipo/LIHV Battery Charger? (ID – Inside Diameter and OD – Outside Diameter)
What size barrel plug is needed for the Happymodel UR65 FPV Racing Drone Spare Part 1S06 6 Way Lipo/LIHV Battery Charger? (ID – Inside Diameter and OD – Outside Diameter)
I connect it to a 15v 2a source and the batteries have 5hrs without turning off the charging device.
Is it normal or do I need more amps, what are the optimal volts and amps? or what matters most are the amps?
Hi There can we charge E-Flight 150mAh 1S 3.7V 45C LiPo Battery: PH 1.5 (Ultra Micro), using the Happymodel Mobula 7 Charger?