Binding procedure:
Comparsion of Mobula6 HDZERO version
Description
Happymodel Mobula6 Freestyle HD BNF is a 65mm low light BNF using the HDZero AIO5 designed for freestyle whooping. It is under 20grams
Specifications
-
- Weight: 19.6g
- Recommended Battery: 1S 300mAh
- Propeller Size: 31mm
- AIO Flight controller
- MCU: STM32F411 (100MHz, 512K Flash)
- Gyro: BMI270 or ICM42688P
- On board voltage and amperage meters
- Built-in 5A(each) BLHeli_S 4-in-1 ESC
- Built-in 5.8G HDZero VTX
- Built-in SPI ExpressLRS 2.4GHz receiver
- Built-in 5V 1A BEC
- Board size:28.5×28.5mm with a 25.5×25.5 mounting hole size
- Firmware target: CRAZYBEEF4SX1280
- HDZero Lux Camera
- Sensor size: 1/2 inch
- Resolution: 720p60 4:3 and 16:9
- FOV: D:155° H:126° V:94°(4:3)
- FOV: D:145° H:126° V:70°(16:9)
- WDR
- Motors
-
- Kv:28000
- Stator diameter: 7mm
- Stator length:2mm
- Shaft diameter: Φ1mm
- Weight:1.5g
- Included
- 1x Happymodel Mobula6 Freestyle HD BNF
- 1x Spare canopy
- 1x Spare propeller(set)
- 1x Screw driver
- 1x propeller disassemble tool
Default port and receiver settings:
Default factory dump file for betaflight 4.4.2
Mobula6 Freestyle HD dump file for BF4.4.2
3D Print file for Antenna fixed holder: