Binding procedure video: Mobula8 released uart elrs version recently. It comes with a new X12 ELRS Pro v1.1 flight controller, onboard vtx and onboard uart elrs receiver are controlled by ESP32 chip , now you have a free set of UART and you can flash single ExpressLRS firmware for the Mobula8 ELRS . Features: X12…
Notes: Recommend use the battery with lead wire, both A30 and BT2.0 plug battery are compatible. Binding procedure(not same drone ,but binding is the same): Specifications: Brand Name: Happymodel Model: Mobula6 HDZERO V3 Frame wheelbase: 65mm Weight: 25.7 gram without battery Size: 80mm*80mm*50mm UART ELRS v3.0 ready Compatible with 1S Lipo battery or Lihv…
Binding procedure(not same drone ,but binding is the same): Notes: Recommend use the battery with lead wire, both A30 and BT2.0 plug battery are compatible. Specifications: Brand Name: Happymodel Model: Moblite7 HDZERO V3 Frame wheelbase: 75mm Weight: 31.5 gram without battery Size: 98mm*98mm*50mm UART ELRS v3.0 ready Compatible with 1S Lipo battery or…
Notes: Before buying this flight controller, make sure you have good soldering skills and can solder tiny pads. Any flight controller failure caused by welding errors is not covered by the warranty. The motor plugs didn’t pre-solder in our factory. Flight controllerSuperX HD ELRS Betaflight 4.4.2 firmware ready Firmware target: CRAZYBEEF4DX MCU:STM32F411CEU6 (100MHz, 512K FLASH) Sensor:…
