Specifications:
Brand Name: Happymodel
Mode Name: Mobula7
Item Name: 1-2S 75mm Brushless Whoop racer drone BNF
Wheelbase: 75mm
Size: 98mm*98mm*36mm
Weight: 27g(without battery)
Max Take off Weight:60g
Flying weight:40g(with Original 250mah lipo battery x2 )
Features:
New Crazybee F4 V2 PRO Flight controller 1-2s Lipo compatible
2S whoop more powerful and more flight time
Betaflight support , multi flight mode: ACRO/AIR/ANGLE
New 0802 Powerful and High efficiency Brushless motor and Smooth ESC
Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles(DSMX version no RSSI output)
Smartaudio ready , change VTX bands, channels via OSD
Adjust the settings and the PID of the flight controller via OSD
Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
Flysky version support both AFHDS and AFHDS-2A protocol transmitter
DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter
Frsky EU-LBT version support Frsky EU-LBT firmware transmitter
Full telemetry function ready
Head lights ready
Camera angle adjustable
Real Bind and Fly version
Buzzer Ready
Package includes:
| Item Name | Basic version | Standard version |
| 75mm Brushless Bwhoop75 Frame | 1 | 1 |
| Option1: Crazybee F4FR PRO V2.0 FC built-in Frsky SPI NON-EU receiver | 1 | 1 |
| Option2: Crazybee F4FS PRO V2.0 FC built-in Flysky SPI receiver | ||
| Option3: Crazybee F4DX PRO V2.0 FC built-in DSM2/DSMX receiver | ||
| Option4: Crazybee F4 PRO V2.0 FC with External Frsky XM+ receiver(EU-LBT firmware) | ||
| SE0802 KV16000 Motor | 4 | 4 |
| 40mm propeller(4cw+4ccw) | 1 | 1 |
| AIO Camera & VTX | 1 | 1 |
| Buzzer | 1 | 1 |
| 3.8v 250mah 30C/60C battery | 4 | 4 |
| USB Lipo/LIHV Charger | 1 | 0 |
| 1S06 6 way Lipo/LIHV charger | 0 | 1 |
| Propeller disassemble tool | 1 | 1 |
| Screwdriver | 1 | 1 |
*Notes: Standard version not include Power Adapter
*DSM2/DSMX and Frsky EU-LBT version are Serial-based receiver.
Spare parts specifications:
| Motor | Mode: SE0802 KV16000 Configuration:9N12P Stator Diamter:8mm Stator Length:2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.*Len):Φ10.5mm*14.5mm Weight(g):1.8g No.of Cells(Lipo):1S-2S |
| Flight controller | (Frsky version) CRAZYBEEF4FR PRO v2.0 Firmware target: CrazybeeF4FR (Flysky version) CRAZYBEEF4FS PRO v2.0 Firmware target: CrazybeeF4FS (DSM2/DSMX version) CRAZYBEEF4DX PRO v2.0 Firmware target: CrazybeeF4DX (Frsky EU-LBT version) CRAZYBEEF4 PRO v2.0 Firmware target: CrazybeeF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1-3S battery input (DC 3.5-13V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable) Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable) DSM2/X Version built-in Serial-based DSM2/DSMX compatible satellite receiver Frsky EU-LBT version with External XM+ receiver Built-in Betaflight OSD(SPI Control) Built-in Current meter Max 28A Current meter scale set to 1175 Built-in 5V 1A Buck / Boost with LC filter Built-in voltage detection BLHELI_S pass-through Ready Heading LED Ready |
| Onboard 4in1 ESC | MCU upgraded to EFM8BB21 Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v) Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: S_H_50_REV16_7.HEX Default protocol: DSHOT600 |
| Frsky NON-EU receiver Version | SPI BUS receiver Frsky D8/D16 switchable Compatible Non EU transmitter both D8 and D16 mode Channels: 8ch or 16ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
| Flysky receiver Version | SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 300m Failsafe support |
| DSM2/DSMX receiver version | Serial bus receiver Protocol: DSM2/DSMX compatible Channels:6-9 (Depend on your radio) No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
| Frsky EU-LBT Version( External XM+ receiver) | Operating Voltage Range: 3.7~10V Operating Current: 30mA @5V Operating Range: Full range With RSSI output on board: Analog 0~3.3V Firmware Upgradeable, Default firmware EU-LBT with RSSI |
| AIO Camera&VTX | Output power: 25mw Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Camera resolution: 700TVL Field of view: 120° Video Format: NTSC Antenna: RG178 antenna Frequency: 5.8GHz 5bands 40 channels With RacebandSmartaudio ready(Frsky EU-LBT and DSMX version not compatible) Size: 13.9″12.0mm ( L*W ) Weight: 3g |
| Lipo Battery | Capacity:250mAh Voltage:3.8v Continuous Discharge Rate: 30C Instantaneous discharge rate: 60C Size: 55mmx12mmx7mm Weight: 6.5gConnector: PH2.0*Notes: Need 2pcs batteries for Series circuit |
Just received a new Mobula7 from banggood with a faulty VTx. They don’t seem to have a replacement VTx and don’t want to replace the whole quad. Do you guys have a replacement VTx or can I submit a warranty claim through you guys? I bought this product expecting to work and it’s not working right out of the box as intended. Thanks!
I have a Jumper T8SG V2 Plus as transmitter.
Which one can I use Frsky EU-LBT or non-EU for this transmitter?
Where can I download the Betaflight hex file that comes shipped with the Mobula7?
The latest Betaflight 4.0.0 build 1222 does not seem to support settings such as “resource LED_STRIP 1 B04” and “resource RX_BIND_PLUG 1 A09”.
The date on the as-shipped hex file does not match any official Betaflight build date. Is it a custom build?
Thanks!
Paul
Will I be able to bind this to a Taranis Dx9 plus transmitter without purchasing additional parts?
Thanks
I think you mean Frsky Taranis x9d plus, yes compatible without purchasing additional parts. Choose Frsky non-eu version please .
I ORDERED MOBULA 7 WITH GOGGLES. I GOT A BOX OF PARTS. I HAVE STRUGGLED WITH THE MICRO SOLDERING.
I GOT TWO CIRCUIT BOARDS, ONE TRIANGULAR AND ONE SQUARE.. I NEED INSTRUCTIONS TO COMPLETE ASSEMBLY AND CONNECT THE TWO BOARDS
Salve, mi chiamo Gianni e ho una domanda:
Nel mio mobula 7 con fc “Crazybee Pro F4 FS” posso aggiungere una ricevente flysky?
Grazie ciao
Hi, my name is Gianni and I have a question:
Can I add a flysky receiver to my mobula 7 with fc “Crazybee Pro F4 FS”?
Thanks bye
Evangelion 1.11 English Dub 1080p Download tamverle inobeeastral projection techniques by sylvia browne Download Mein Instagram-Konto wurde deaktiviert cdn.thingiverse.com CothDoleTerneexperry Download mibemberma https://mitarecoreans.wixsite.com/taphotencock/post/the-divine-nine-437-443-pdf-google-drive GDToT The Fate of the Furious (2017)080p – BDRip – DD 5.1 – 448Kbps Telugu Hindi Eng].mkv trello bang-on-balls-chronicles-v03_03_2021 serymenlima.wixsite VFXfile.com – Una forma fГЎcil de compartir sus archivos – DownloadEagecaurceri 1995 fleer ultra x men price guide The Art Of Tim Burton Book Pdf 76 !NEW! Download