Specifications:
Brand Name: Happymodel
Item Name: Sailfly-X 2-3S Micro FPV racing drone
Wheelbase: 105mm
Size: 95mm*95mm*50mm(without propellers)
Weight: 38g(without battery)
Weight:63g(with Original 3s 300mah Lipo battery )
Features:
Crazybee F4 PRO V2.1 AIO Flight controller 2-3s Lipo Compatible
The lightest 1102 brushless motor only 2.8g with double ball bearings
Light ,Powerful and smoothly
AIO 5.8g 40ch 25mw vtx / 700tvl camera with smartaudio
2mm carbon fiber frame with TPU 3d-printed canopy
Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles(DSMX version no RSSI output)
Frsky version support both NON-EU and EU-LBT Frsky transmitter(EU-LBT need to update firmware to Betaflight 4.0( release date :2019-4-11)
Flysky version support both AFHDS and AFHDS-2A protocol transmitter
DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter
No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS etc..
Full telemetry function ready (Frsky and Flysky version support)
Real Bind and Fly version
Compatible both for 2s-3s Lipo/LIHV
Package includes:
| Item Name | Qty |
| Sailfly-X frame | 1 |
| 30 degree angle canopy(red 3d print tpu) | 1 |
| 40 degree angle canopy(purple 3d print tpu) | 1 |
| Option1: Crazybee F4FR V2.1 PRO FC built-in Frsky RX | 1 |
| Option2: Crazybee F4FS V2.1 PRO FC built-in Flysky RX | |
| Option3: Crazybee F4DX PRO V2.1 FC built-in Serial-bus DSM2/DSMX RX | |
| Option4: Crazybee F4 V2.1 PRO FC no RX verion | |
| EX1102 KV8500 Motor 1.5mm shaft | 4 |
| 65mm propeller(6cw+6ccw) | 1 |
| HCF7P 25mw VTX/700tvl camera AIO | 1 |
| 3S 11.4v 300mah 30C/60C battery | 1 |
| Propeller disassemble tool | 1 |
| Screwdriver | 1 |
Spare parts specifications:
| Motor | Mode: EX1102 KV8500
Configu-ration:9N12P |
| Flight controller | (Frsky version) CRAZYBEE F4FR PRO V2.1 Firmware target: CrazybeeF4FR
(Flysky version) CRAZYBEE F4FS PRO V2.1 Firmware target: CrazybeeF4FS (DSM2/DSMX version) CRAZYBEE F4DX PRO V2.1 Firmware target: CrazybeeF4DX (No RX version) CRAZYBEE F4 PRO V2.1 Firmware target: CrazybeeF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Board size: 28.5 * 28.5MM Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable) Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable) DSM2/X Version built-in Serial-based DSM2/DSMX compatible satellite receiver No RX version need to add external Receiver Built-in Betaflight OSD(SPI Control) Built-in Current meter Max 28A Current meter scale set to 1175 Built-in 5V 1A BEC with LC filter Built-in voltage detection |
| Onboard 4in1 ESC | MCU upgraded to EFM8BB21
Power supply: 2-3S LiPo/LiPo HV (7.4v/13v) |
| Frsky receiver Version | SPI BUS receiver
Frsky D8/D16 switchable Compatible both Non EU and EU-LBT transmitter Channels: 8ch or 16ch EU-LBT support(need to update betaflght v4.0 date 2019-04-11) Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
| Flysky receiver Version | SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 300m Failsafe support |
| DSM2/DSMX receiver version | Serial bus receiver
Protocol: DSM2/DSMX compatible Channels:6-9 (Depend on your radio) No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
| PNP No RX version | No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS etc. |
| AIO Camera&VTX
(HCF7P) |
Output power: 25mw Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Camera resolution: 700TVL Field of view: 120° Video Format: NTSC Antenna: RG178 antenna Frequency: 5.8GHz 5bands 40 channels With Raceband Smartaudio ready(Frsky EU-LBT and DSMX version not compatible) |
| Lipo Battery | Capacity:300mAh Voltage:11.4v Continuous Discharge Rate: 30C Instantaneous discharge rate: 60C Size: 65mmx18mmx11mm Weight: 25g Connector: XT30 |
When will race day quad receive the new sailfly x i cant wait any longer iv been waiting for. Almost over a month can you guys plz help me out and i love my mobula7 and trashcan and my snapper7
Thank you so much for all your awesome kwads u guys created
Hello i recently bought a mobula7 and when i was changing the prop on my kwad one of my motors leads happened to come out is there a chance you guys will help me out with this issue please and thank you very much i really loved my mobula7 but now i cant enjoy my drone
Thank you and have a nice day happymodel
Hi,
I recentlly bought a sailfly-x and on my maiden flight with 3s it only flew for 2 min. when one of the motors / esc just died.
I an relly pissed about this situation, specially because it was really a brilliant flyer! and i didn’t even had the chance to fly it outside.
I don’t know how to get access to the warranty.