Specifications:
Brand Name: HDZERO and HappyModel Co-branded
Model: Mobula7 HDZERO
Frame wheelbase: 75mm
Weight: 41gram without battery
Size: 98mm*98mm*50mm
Radio Link System required: ExpressLRS 2.4GHz TX module 2.0 ELRS firmware
Compatible with 2S-3S Lipo battery or Lihv battery
Recommend Battery: 2S 300/350/450/550/650 mAh
3s 300/350/450 mAh
Battery Plug: XT30
Battery holder tray size: 17mm*13mm
Flight controller | MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Mount pattern: 25.5×25.5 M2 Power supply: 2-4S Lipo battery Built-in 12A Blheli_s ESC each Built-in Betaflight OSD(SPI Control) Built-in SPI ExpressLRS 2.4GHz receiver Built-in 5V 1A BEC Flight controller firmware target: CRAZYBEEF4SX1280 Voltage meter scale setting 110 Amperage meter scale setting 470 |
Onboard 4in1 ESC | MCU upgraded to EFM8BB21 Power supply: 2-4S LiPo/LiPo HV (7v/17v) Currents: 12A continuous peak 15A (5 seconds) Support BLHeliSuite programmable Factory firmware: F_H_40_REV16_8.HEX Default protocol: DSHOT150/DSHOT300/DSHOT600 |
Onboard SPI ExpressLRS 2.4GHz Receiver | Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz RF Frequency: 2.4GHz Antenna plug: IPEX Telemetry output Power: <12dBm Receiver protocol: SPI ExpressLRS Could bind with ELRS V2.0 firmware TX module |
Camera RunCam Nano HDZero |
Model: Racer SKU: HDZ3203 Lens: FOV D150 degree Power: 450mA@3.3v Digital: 1280*720@60fps |
VTX HDZero Whoop(TX5S.1) |
Model: HDZero Whoop SKU: HDZ3110 Frequency: 5.8G Resolution Default: 1280*720@60fps RF power: 25mw/200mw RF Connector: U.FL Interface: 4 lane MIPI CSI YUV422 Video Connector: 20 Position 0.30mm Pitch Size: 32.5mm x 32.5mm x 7mm Weight: 5.4g Power: 410mA@12V Mounting: 25.5mm*25.5mm,M2 clearance hole |
Motor | Mode: EX1102 KV9000 Configu-ration:9N12P Stator Diamter:11mm Stator Length:2mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ13.5mm*16mm Weight(g):2.8g No.of Cells(Lipo):2S-3S |
Propeller | Brand Name: NewBeeDrone Model: AZI Size: 40mm Tri-blade Color: transparent Shaft size: 1.5mm |
Hello Happymodel Team,
I’ve got some serious problems with the flight performance of my new Mob7 HD Zero.
There is some crazy Yaw washout everytime after a dive and the Throttle seems kinda stuck sometimes.
Even if the Throttle input is at 0% the Quad is still floating for a few seconds and not dropping down like normal.
I tried Gemfan Triblade 1635 Props but nothing changed.
I think I have to adjust some Betaflight settings, but i don’t know which ones…
Can you please help me out with this?
Greetings
Stephan
BONJOUR A VOUS
MON MOBULA 7 HD ZERO ELRS (neuf ) NE S APPAIRE pas AVEC MA RADIOMASTER elrs. JE PASSE PAR BETAFLIGHT MAIS RIEN, LE VOYAN CLINIOTE BIEN SUR LE DRONE( pour appairage) MAIS IMPOSSIBLE D APPAIRER.AVEZ UN SOLUTION POT MOI ( mes autre drone s appaire bien)
MERCI A VOUS