Notes: Because Emax can’t provide Avan rush propellers in time, so we will sending the LarvaX with HQPROP T2.5*2.5*3 propellers and EMAX Avan rush propellers randomly .
The Larva-X DSMX version comes with Speki+ DSM2/DSMX receiver instead SP09 DSM2/DSMX receiver after Mar.10th 2021
Specifications:
Brand Name: Happymodel
Item Name: Larva X 2-3S 2.5inch Brushless FPV drone
Wheelbase: 100mm
Size: 88mm*88mm*45mm(without propellers)
Weight: 50g(without battery)
Recommended Battery:
3S 300mah/350mah 2S 450mah 3S450mah
Features:
New Crazybee F4 PRO V3.0 AIO Flight controller 2-4s Lipo Compatible
Powerful and smoothly
Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles
Camera Angle adjustable
VTX power switchable 25mw~200mw
Smartaudio ready , change VTX bands, powers, channels via OSD
Receiver option : Frsky D8 ,Flysky , Specktrum ,Frsky RXSR ,TBS CRSF
Diamond VTX Ready
Compatible both for 2s-3s Lipo/LIHV
Package includes:
| Item Name | Qty |
| Larva X frame | 1 |
| Receiver Option1: Crazybee F4FR V3.0 PRO FC built-in Frsky D8 NON-EU RX | 1 |
| Receiver Option2: Crazybee F4FS V3.0 PRO FC built-in Flysky RX | |
| Receiver Option3: Crazybee F4FS V3.0 PRO FC with DSM2/DSMX RX | |
| Receiver Option4: Crazybee F4 V3.0 with external Frsky RXSR receiver | |
| Receiver Option5: Crazybee F4 V3.0 with external TBS Crossfire Nano RX | |
| 1103 KV7000 motor | 4 |
| 2.5inch propellers (4cw+4ccw) | 1 |
| Camera : Runcam Nano2 | 1 |
| VTX: 5.8g 25mw~200mw switchable with 720p DVR (Diamond_vtx) | |
| Propeller disassemble tool | 1 |
| Screwdriver | 1 |
Spare parts specifications:
| Motor | Mode: EX1103 KV options: KV7000 Configu-ration:9N12P Stator Diamter:11mm Stator Length:3mm Shaft Diameter: Φ1.5mm Motor Dimension(Dia.*Len):Φ13.5mm*16mm Weight(g):3.7g |
| Flight controller | (Frsky version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR (Flysky version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS (No RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 2-4S battery input (DC 7-17V) Built-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable) Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable) No RX version need to add external Receiver Built-in Betaflight OSD(SPI Control) Built-in Current meter Max 70A Current meter scale set to 470 Built-in 5V 1A BEC Built-in voltage detection |
| Onboard 4in1 ESC | MCU upgraded to EFM8BB21 Power supply: 2-4S LiPo/LiPo HV (7v/17v) Current: 10A continuous peak 12A (5 seconds) Support BLHeliSuite programmable Factory firmware: F_H_40_REV16_5.HEX Default protocol: DSHOT600 |
| Internal Frsky NON-EU receiver Version | SPI BUS receiver Frsky D8/D16 switchable Compatible Non EU transmitter both D8 and D16 mode Channels: 8ch or 16ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
| Internal Flysky receiver Version | SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 300m Failsafe support |
| External TBS Crossfire version | CRSF Protocol , Official TBS transmitter compatible |
| External DSMX version | Frequency range: 2.403-2.479Ghz Input power: 3.3V — 5V Response time: 22ms / 11ms Resolution: 1024/2048 Display method: LED Operating voltage: 3.3V Working current: 60MA Size: 18mm*13mm*5mm Weight: 0.9 g Antenna length: 30mm Data format: Serial port Protocol: DSM2/DSMX Distance: no ground interference (1 m from the ground ) > 300m |
| External Frsky RXSR version | Weight: 1.5g
Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel) Operating Voltage Range: 3.5V~10V Operating Current:70mA@5V Firmware Upgradable Compatibility: FrSky X Series modules and radios in D16 mode Could support Frsky New ACCST Protocol ( Upgrade firmware) |
| Diamond_VTX | Output power: 25~200mw switchable
Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 250mA~510mA(type) Antenna: RG178 antenna U.FL interface Frequency: 5.8GHz 5bands 40 channels With Raceband Smartaudio ready Weight: 3g without antenna Video Output Size: VGA (640×480) Video Output format: NTSC Record video size : 1280×720 @25FPS TF Card support: Max.32G Interface: JST SH1.0 3pin for Camera JST SH1.0 5pin for Connect with F3/F4 Flight controller Compress Format: AVI |
| Runcam NANO2 | Model: Nano 2
Image Sensor: 1/3″ CMOS Horizontal Resolution: 700TVL Lens: 2.1mm(M8) FOV 155° Signal System: NTSC / PAL S/N Ratio: >50dB Electronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: 0.01Lux@1.2F D-WDR: Auto Day/Night: Color Power: DC 3-5.5V Current : 110mA@5V 120mA@3.3V Housing Material: ABS Net Weight: 3.2g Dimensions: L14mm*W14mm*H16mm |
I just purchased a Larva X with the R-XSR RX installed.
Will it come with the new, V2 frame, (4) mounting hole EX1103S motors and TPU piece for the VTX..?
I just purchase the Larva X with the R-XSR installed from Banggood today.
Will this ship with the new, V2 frame, (4) mounting hole EX1103S motors and TPU piece for the VTX..?
Thank you, Chrys Burge
I just purchase the Larva X with the R-XSR installed from Banggood today.
Will this ship with the new, V2 frame, (4) mounting hole EX1103S motors and TPU piece for the VTX..?
Thank you, Chrys Burge
Bangoogd’s website says that the processing time is June 12th. I am assuming that they are waiting for a shipment from Happy Model. Just wondering if this will be your V2 of the Larva X with the new, V2 frame, (4) mounting hole EX1103S motors and TPU piece for the VTX. Please let me know.
Will there be a new 2to3s version with elrs in the near future? I own a larva x and it’s the best flying micro I have owned!